欢迎访问唐山天物彩板有限公司!

关于天物| 收藏天物| 联系天物

河北彩涂卷品牌,彩钢板厂家电话,彩钢卷价格多少钱一平米_天物彩涂板

全国咨询热线:

13931586578

当前位置:主页 > 新闻资讯 >

彩钢板纵剪运行前的五项准备工作

发布者:天物彩板    发布时间:2021-03-26 09:14

彩钢板纵剪运行前的五项准备工作

彩钢卷纵剪作为数控车床行业中应用广泛且要求严格的生产线之一,彩钢卷纵剪其操作规程非常严格。机器运行前的准备、运行工程中的操作规程、停机后的检查等都有严格的规章制度。我们在实际操作中严格按照机器的操作步骤进行操作。不得擅自更改或省略操作步骤。今天我们主要介绍一下分切线运行前的四点准备工作。

1首先要检查生产线上各岗位的资质和证书,是 彩钢卷纵剪否具有较高的机电基础知识,并通过自动控制(数控)培训,考试合格后取得《纵剪线操作证》
2打开气源,当气压达到6Pa时,打开放水阀放水,启动机器
三。 彩钢卷纵剪检查油雾化器的油量。油量应在油杯的1/3-2/3之间。不足的,应当补充。加油时一定要关闭气源,排空压缩空气
4润滑导轨和丝杠,擦去油污
5启动电源测试,检查传感器是否正常,紧固螺栓是否可靠。

As one of the widely used and strict production lines in CNC lathe industry, slitting line has very strict operating procedures. There are strict rules and regulations for preparation before machine operation, operation procedures in operation engineering and inspection after shutdown. We operate in strict accordance with the operation steps of the machine in actual operation. Do not change or omit the operation steps without authorization. Today, we will mainly introduce the four points of preparation before the operation of the slitting line.

1. First of all, it is necessary to check the qualification and certificate of each post on the production line, whether they have higher mechanical and electrical basic knowledge, and pass the automatic control (numerical control) training, and obtain the "longitudinal cutting line operation certificate" after passing the examination
2. Open the air source, when the air pressure reaches 6 PA, open the drain valve to drain water, and then start the machine
3. Check the oil quantity of the oil atomizer. The oil quantity should be between 1 / 3-2 / 3 of the oil cup. If it is insufficient, it should be supplemented. Make sure to close the air source and empty the compressed air when replenishing the oil
4. Lubricate the guide rail and lead screw, and wipe off any oil stain
5. Start the power test, check whether the sensors are normal and whether the fastening bolts are reliable.
推荐产品
联系我们

电话:13931586578

联系人:陈经理

地址:河北唐山高新技术开发区

邮箱:554963417@qq.com